| Rating: |
96
|
Total Votes: 14 |



Wireless
interference
Thick brick walls and large objects aren't the only culprits of
signal interference. Other wireless gadgets commonly found around a
home or office like cordless phones, garage door openers and
television remotes function through radio signals that most likely
emit the same frequency as your wireless router. This can interfere
with the strength of your wireless signal. Place your router away
from such wireless equipment or adjust the frequency of the
wireless router so that these signals don't interfere with each
other.
Similar but not the same
Just like figuring out why you’re signal strength may not be
as good as it should depends on factors like location and the kind
of antenna you use, rather than a fault with the router, so does
signal strength as distance increases between your computer and the
wireless router. As you move your computer further away from the
wireless router, the signal will inevitably weaken. To boost signal
strength at the periphery, a repeater, or Wireless Access Point
(WAP), and not another router, may just be the answer.

Stay within the family
Familiarity doesn’t always breed contempt. At least not in
the case of wireless routers. Although this is not a fixed rule or
guaranteed to affect a router's performance, buying a router and
network adapter of the same brand may be a good idea. Often,
manufacturers produce routers and network adapters that are
compatible and may increase signal strength. Alternatively, routers
and adapters of different brands may (though not always) conflict
and result in weakened signal strength.
It’s time for an update
Something old or in less than working condition will cost more to
maintain than just buy a new one. Almost always. The same applies
for a wireless router. That’s not to say that you need to
border on the brink of bankruptcy buying the latest technology. But
it couldn’t hurt to visit the website of your router’s
manufacturer from time to time. Downloadable firmware can fix old
problems, improve your router’s performance and increase
signal strength. Also, update the firmware of your network adapter.
More serious problems however, may require more serious
solutions.
Don’t always blame the router
As mentioned earlier, the less than satisfactory performance of
your wireless connectivity may not be because of the router at all.
Replacing or upgrading the router will not solve an unrelated
issue. In addition to all of the above, you’re computer
should also be well-equipped to receive these signals. Here, a
reflector or wireless USB network adapter may help.

Do It Yourself Reflector
Treat this as a very useful craft project. Like a high gain
antenna, a reflector can direct the existing signal, allowing you
to take advantage of the signal the router is providing. Unlike an
antenna, a reflector actually reflects an emitted signal in the
desired direction. A tinfoil reflector acts like a mirror and is
something that you can make easily. All you’ll need is some
tinfoil, cardboard and sticky tape.
1. Cut a piece of cardboard into a 15 x 10 cm
rectangle and wrap it completely in tinfoil.
2. Cut an additional piece of cardboard (or paper)
into a circle. Bend the shape slightly.
3. Slip the antenna into the paper figure. The
mechanism will serve as a dish to receive signals as well as
reflect and redirect them.

~Zahid Javali
Computer Tips with MS Office Tips Newsletter


